Posted by John Brock on March 22, 2010, 11:34 pm
Shirley just tapped a fresh keg of Fat Tire Amber. It's filling but
drink it dry while it's fresh.
I was unable to determine the correct size of the wrench for the
clutch.adjuster. I was too dark to see well. I ended up using a 5.5mm
hex key. It worked but that can't be the right wrench. The jamb nut is
11/16.
Does any body know?
BigPiper
BS246
Posted by TL Mitchell on March 23, 2010, 2:00 am
> I was unable to determine the correct size of the wrench for the
> clutch.adjuster. I was too dark to see well. I ended up using a 5.5mm
> hex key. It worked but that can't be the right wrench. The jamb nut is
> 11/16.
Off the top o' my head I'm thinking 3/8 hex. Not really sure cuz I just grab
one that looks right. And then usually reach for the right one. Never look
at the numbers cuz they're rubbed off the plastic holder thingie.
> Does any body know?
Probably.
112
Posted by Jinks on March 23, 2010, 7:02 am
>Shirley just tapped a fresh keg of Fat Tire Amber. It's filling but
>drink it dry while it's fresh.
>I was unable to determine the correct size of the wrench for the
>clutch.adjuster. I was too dark to see well. I ended up using a 5.5mm
>hex key. It worked but that can't be the right wrench. The jamb nut is
>11/16.
>Does any body know?
>BigPiper
>BS246
Clutch adjuster?! What's a clutch adjuster?............8^)
Jinks ('86FXRS, '07FLTR)
#64
Remember, "No good deed goes unpunished"
Posted by AH#104 on March 23, 2010, 8:04 am
John Brock axed:
> I was unable to determine the correct size of the
>wrench for the clutch.adjuster. I was too dark to
>see well. I ended up using a 5.5mm hex key.
>It worked but that can't be the right wrench.
>The jamb nut is 11/16.
> Does any body know?
Yes, everybody knows.... because I asked it July 16th 2009.
ASSHOLE#104 Len
Between 3/16 and 1/4
Posted by AH#104 on April 5, 2010, 9:53 pm
>>>> ASSHOLE#104 Len
>>>> Between 3/16 and 1/4
> I have it on competent authority that is requires a 7/32" Hex key.
Didn't *I* just say that?
ASSHOLE#104 Len
XML Sitemap
> clutch.adjuster. I was too dark to see well. I ended up using a 5.5mm
> hex key. It worked but that can't be the right wrench. The jamb nut is
> 11/16.