JET JW1025 2-Inch Band Hose Clamp

register ::  Login Password  :: Lost Password?
Posted by Alessio on May 22, 2009, 8:29 am
 
please rate
this thread
Price:$1.00
Image: http://specialdealfinder.info/image.php?id°0005A1IH
Best deal: http://specialdealfinder.info/index.php?id°0005A1IH







If you're in the market for a good quality hose clamp at a good price, look no
further.  I have used this clamp for almost a year now and it has performed
above and beyond my wildest expectations.  When I'm not clamping large hoses
with this clamp, I use it as a paperweight to hold my important papers on a
picnic table on a windy day.  The only problem is that I keep on misplacing my
screwdriver, making it hard to me to loosen the clamp to put it on a different
hose.  I like to change hose clamps every 3 months or 45 miles, whichever comes
first, on my wooden-horse car.  And no, not as big as the one in the mythology
books, but just big enough to get me to work and back (clamp salesman with
Clamps-R-Us).
I found this hose clamp to be the perfect accessory to get my ... order over the
magic ...free shipping barrier. It is likely I will find a use for it over time
so it is a valuable addition to my emergency repair kit I keep in the garage.
The manufacture's review should state: "designed to fit SMOOTH piping to...."
not just "designed to fit piping to ...".  Very tough application when to comes
to seating a ribbed hose and the compression needed to secure that surface to a
fitting.The steel band clamp should only be used in one type of application.
That being where you are putting two SMOOTH surfaces together, like a garden
hose or radiator hose. But with a DC application of a ribbed hose, the steel
band clamp is NOT the preferred choice, use the wire clamp.The steel band clamp
will only strip and never be fully seated trying to compress and secure the wire
rib to the smooth DC fitting. The steel banding and worm screw is not designed
to do that task and provide the needed pressure to fully seat the ribbed hose.
Whereas, the wire clamp will actually strattle the rib on both sides and create
a perfect clamping fit.I tried to save the twenty cents over the wire clamp, and
wound up stripping the clamp thread on about 50% of the applications with the
steel band clamps. I antied up and spent the extra cash and got the right
product, the wire clamps for the ribbed DC hose.





SIMILAR PRODUCTS:

 Logitech V320 Cordless Optical Mouse for Notebooks-
Grey:http://specialdealfinder.info/index.php?id°00MKWM2W
 JET JW1023 5" Band Hose Clamp -
Each:http://specialdealfinder.info/index.php?id°0005A1IF
 JET JW1021 3-Inch Band Hose
Clamp:http://specialdealfinder.info/index.php?id°0005A1ID
 JET JW1316 3-Inch Wire Hose Clamp -
Each:http://specialdealfinder.info/index.php?id°0005A1IX
 JET JW1317 4-inch Wire Hose
Clamp:http://specialdealfinder.info/index.php?id°0005A1IY

ACCESSORIES:

 This Old House:http://specialdealfinder.info/index.php?id°00ILXPTO
 Building Construction
Illustrated:http://specialdealfinder.info/index.php?id 70087811

This Thread
Bookmark this thread:
 
 
 
 
 
 
  •  
  • Subject
  • Author
  • Date

Contact Us | Privacy Policy

XML SitemapXML Sitemap