Posted by TF on June 17, 2006, 12:21 pm
Hi,
I am trying to replace the fork seals on a 1966 CL77 scrambler.
I cannot find nor a bike shop to help.
I need to remove the fork seal retainer which screws into the bottom fork
body around the top tube.
It has 2 holes in line with the fork to remove but cannot find a spanner
wrench to fit. It is a face pin spanner on top of the fork not on the sides
and is very close to the piston (the holes).
Any thoughts?
Thanks
PS- Any one have Bill Silvers email?
Posted by Polarhound on June 17, 2006, 3:00 pm
TF wrote:
> Hi,
> I am trying to replace the fork seals on a 1966 CL77 scrambler.
> I cannot find nor a bike shop to help.
> I need to remove the fork seal retainer which screws into the bottom fork
> body around the top tube.
> It has 2 holes in line with the fork to remove but cannot find a spanner
> wrench to fit. It is a face pin spanner on top of the fork not on the sides
> and is very close to the piston (the holes).
> Any thoughts?
> Thanks
http://www.vjmc.org is your friend. Sign up for the mailing list.
Posted by TF on June 17, 2006, 7:25 pm
already signed up no go there...
> TF wrote:
>> Hi,
>> I am trying to replace the fork seals on a 1966 CL77 scrambler.
>> I cannot find nor a bike shop to help.
>> I need to remove the fork seal retainer which screws into the bottom fork
>> body around the top tube.
>> It has 2 holes in line with the fork to remove but cannot find a spanner
>> wrench to fit. It is a face pin spanner on top of the fork not on the
>> sides and is very close to the piston (the holes).
>> Any thoughts?
>> Thanks
> http://www.vjmc.org is your friend. Sign up for the mailing list.
Posted by Polarhound on June 17, 2006, 8:37 pm
I don't remember seeing a post from you about it on the list. Given
that it seems like everyone and their brother's cousin's sister's
uncle's college roommate seems to have a CL72/Cl77, I find it hard to
believe that such a question would have gone unanswered.
TF wrote:
> already signed up no go there...
>
>
>
>> TF wrote:
>>> Hi,
>>> I am trying to replace the fork seals on a 1966 CL77 scrambler.
>>> I cannot find nor a bike shop to help.
>>> I need to remove the fork seal retainer which screws into the bottom fork
>>> body around the top tube.
>>> It has 2 holes in line with the fork to remove but cannot find a spanner
>>> wrench to fit. It is a face pin spanner on top of the fork not on the
>>> sides and is very close to the piston (the holes).
>>> Any thoughts?
>>> Thanks
>> http://www.vjmc.org is your friend. Sign up for the mailing list.
>
>
Posted by TF on June 18, 2006, 9:37 pm
I asked the expert...
Never did post...now I have to find my passsword....
Thanks
>I don't remember seeing a post from you about it on the list. Given that
>it seems like everyone and their brother's cousin's sister's uncle's
>college roommate seems to have a CL72/Cl77, I find it hard to believe that
>such a question would have gone unanswered.
> TF wrote:
>> already signed up no go there...
>>
>>
>>
>>> TF wrote:
>>>> Hi,
>>>> I am trying to replace the fork seals on a 1966 CL77 scrambler.
>>>> I cannot find nor a bike shop to help.
>>>> I need to remove the fork seal retainer which screws into the bottom
>>>> fork body around the top tube.
>>>> It has 2 holes in line with the fork to remove but cannot find a
>>>> spanner wrench to fit. It is a face pin spanner on top of the fork not
>>>> on the sides and is very close to the piston (the holes).
>>>> Any thoughts?
>>>> Thanks
>>> http://www.vjmc.org is your friend. Sign up for the mailing list.
>>
XML Sitemap
> I am trying to replace the fork seals on a 1966 CL77 scrambler.
> I cannot find nor a bike shop to help.
> I need to remove the fork seal retainer which screws into the bottom fork
> body around the top tube.
> It has 2 holes in line with the fork to remove but cannot find a spanner
> wrench to fit. It is a face pin spanner on top of the fork not on the sides
> and is very close to the piston (the holes).
> Any thoughts?
> Thanks