Posted by Waz on February 10, 2010, 8:57 am
We've put up another episode of our show about motorbike DIY. I needed
a new hardened steel spacer for my Cagiva's swingarm linkage so Trent
cut a Ducati one down using a Dremel attached to the toolpost of a
lathe.
http://www.garagenight.tv/ep-14-dremel-on-a-lathe-rear-suspension-overhaul-part-1/
Waz from Garage Night TV
Posted by Grimly Curmudgeon on February 10, 2010, 9:05 am
We were somewhere around Barstow, on the edge of the desert, when the
saying something like:
>We've put up another episode of our show about motorbike DIY. I needed
>a new hardened steel spacer for my Cagiva's swingarm linkage so Trent
>cut a Ducati one down using a Dremel attached to the toolpost of a
>lathe.
>http://www.garagenight.tv/ep-14-dremel-on-a-lathe-rear-suspension-overhaul-part-1/
>Waz from Garage Night TV
Just the thing for a shite old hillclimber.
Posted by 72degrees on February 10, 2010, 9:15 am
wrote:
> We were somewhere around Barstow, on the edge of the desert, when the
> saying something like:
> >We've put up another episode of our show about motorbike DIY. I needed
> >a new hardened steel spacer for my Cagiva's swingarm linkage so Trent
> >cut a Ducati one down using a Dremel attached to the toolpost of a
> >lathe.
> >http://www.garagenight.tv/ep-14-dremel-on-a-lathe-rear-suspension-ove ...
> >Waz from Garage Night TV
> Just the thing for a shite old hillclimber.
A bit beyond my bodging boundary.
Fortunately, these items are obtainable for a 1996 YZ250. I'm hoping
to find a package has been delivered with all the bearings, bushes,
spacers and seals required when I get home.
Posted by Waz on February 10, 2010, 9:22 am
> A bit beyond my bodging boundary.
> Fortunately, these items are obtainable for a 1996 YZ250. I'm hoping
> to find a package has been delivered with all the bearings, bushes,
> spacers and seals required when I get home.
If you can, post the dimensions and part/bearings numbers on a forum
somewhere. Think of it as a time capsule for a poor sod in the future
who's looking for something that can be adapted to fit his bike.
Waz
Posted by 72degrees on February 10, 2010, 9:29 am
> > A bit beyond my bodging boundary.
> > Fortunately, these items are obtainable for a 1996 YZ250. I'm hoping
> > to find a package has been delivered with all the bearings, bushes,
> > spacers and seals required when I get home.
> If you can, post the dimensions and part/bearings numbers on a forum
> somewhere. Think of it as a time capsule for a poor sod in the future
> who's looking for something that can be adapted to fit his bike.
Indeed. Somewhere I have FAQ sheets for SO Gilera thumpers with vital
data like bearing references.
XML Sitemap
>a new hardened steel spacer for my Cagiva's swingarm linkage so Trent
>cut a Ducati one down using a Dremel attached to the toolpost of a
>lathe.
>http://www.garagenight.tv/ep-14-dremel-on-a-lathe-rear-suspension-overhaul-part-1/
>Waz from Garage Night TV