Posted by matskevich on June 13, 2007, 11:40 pm
I have this 2005 GSXR 600 with 8k miles. My front brakes lock up
when the bike gets heated up. I bleeded the brake system 2 times,
i put i the DOT 4 fluid. I cant figure out why they start tighting and
then locking up when gets heated. To fix this temporary, i release the
valve on top of the master cylinder. But then again it happens after
a while. Please give me some ideas where to start with this?
Posted by Ian Singer on June 14, 2007, 12:03 am
matskevich wrote:
> I have this 2005 GSXR 600 with 8k miles. My front brakes lock up
> when the bike gets heated up. I bleeded the brake system 2 times,
> i put i the DOT 4 fluid. I cant figure out why they start tighting and
> then locking up when gets heated. To fix this temporary, i release the
> valve on top of the master cylinder. But then again it happens after
> a while. Please give me some ideas where to start with this?
>
Do you mean the calipers have dirty pistons and so when the brake lever
is released they do not retract?
Ian Singer
--
=========================================================================
See my homepage at http://www.iansinger.com
hosted on http://www.1and1.com/?k_id 623894
All genealogy is stored in TMG from http://www.whollygenes.com
Charts and searching using TNG from http://www.tngsitebuilding.com
I am near Toronto Canada, can I tell where you are from your reply?
=========================================================================
XML Sitemap
> when the bike gets heated up. I bleeded the brake system 2 times,
> i put i the DOT 4 fluid. I cant figure out why they start tighting and
> then locking up when gets heated. To fix this temporary, i release the
> valve on top of the master cylinder. But then again it happens after
> a while. Please give me some ideas where to start with this?
>