Posted by Matt Johnson on March 17, 2010, 11:57 am
On Mar 17, 2:10 am, totallydeadmail...@yahoo.co.uk (The Older
Gentleman) wrote:
> > checked it out and gas is leaking from all four drain tubes. i turned
> > the drain screws all the way around the opposite direction, but that
> > didnt change anything. ill take the carb off and try to post some pics
> > tonight.
> I think the simplest solution is probably the most accurate. You haven't
> tightened up the drain screws properly.
> Krusty's right when he says O-rings deteriorate with age, but for all
> four to go at the same time? Nah.
> --
> BMW K1100LT Ducati 750SS Honda CB400F Triumph Street Triple
> Suzuki TS250ER GN250 Damn, back to six bikes!
> Try Googling before asking a damn silly question.
> chateau dot murray at idnet dot com
ok yes to clarify there are four carbs. i suppose i should have called
'it' the carburetor assembly? im new to this... anyways i definitely
didnt take them apart, only removed because my choke cable got loose
and was sort of dangling and the bike wouldnt start. being so new to
this, im a little wary about popping open my float bowls and fiddling
around. All my o rings should be new because (allthough its an 81) the
engine was recently rebuilt. The 'carburetor assembly' is very clean
and looks brand new. The guy i bought it from said essentially the
whole bike was new accept for the frame, the tank, and the instrument
cluster. might have been bs but nothing on it LOOKS thirty years old.
ok so is the new consensus that the drain screws all came out some
during the carb assembly removal and just need to be tightened? that
seems about as likely as something getting inside all of them and
blocking the needles... ill get out a digital camera and get some pics
on here.
p.s. i feel silly for thinking the drain screws were like an on/off
switch. i've been looking at carburetor assembly diagrams for days now
and they are clearly screws... sigh, chalk it up to inexperience! haha
Posted by Matt Johnson on March 17, 2010, 12:17 pm
> On Mar 17, 2:10 am, totallydeadmail...@yahoo.co.uk (The Older
> Gentleman) wrote:
> > > checked it out and gas is leaking from all four drain tubes. i turned
> > > the drain screws all the way around the opposite direction, but that
> > > didnt change anything. ill take the carb off and try to post some pics
> > > tonight.
> > I think the simplest solution is probably the most accurate. You haven't
> > tightened up the drain screws properly.
> > Krusty's right when he says O-rings deteriorate with age, but for all
> > four to go at the same time? Nah.
> > --
> > BMW K1100LT Ducati 750SS Honda CB400F Triumph Street Triple
> > Suzuki TS250ER GN250 Damn, back to six bikes!
> > Try Googling before asking a damn silly question.
> > chateau dot murray at idnet dot com
> ok yes to clarify there are four carbs. i suppose i should have called
> 'it' the carburetor assembly? im new to this... anyways i definitely
> didnt take them apart, only removed because my choke cable got loose
> and was sort of dangling and the bike wouldnt start. being so new to
> this, im a little wary about popping open my float bowls and fiddling
> around. All my o rings should be new because (allthough its an 81) the
> engine was recently rebuilt. The 'carburetor assembly' is very clean
> and looks brand new. The guy i bought it from said essentially the
> whole bike was new accept for the frame, the tank, and the instrument
> cluster. might have been bs but nothing on it LOOKS thirty years old.
> ok so is the new consensus that the drain screws all came out some
> during the carb assembly removal and just need to be tightened? that
> seems about as likely as something getting inside all of them and
> blocking the needles... ill get out a digital camera and get some pics
> on here.
> p.s. i feel silly for thinking the drain screws were like an on/off
> switch. i've been looking at carburetor assembly diagrams for days now
> and they are clearly screws... sigh, chalk it up to inexperience! haha
http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1555.jpg
http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1557.jpg
http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1556.jpg
<a href="http://s4.photobucket.com/albums/y113/luckeyzero/?
action=view¤t=DSCN1555.jpg" target="_blank"><img src="http://
i4.photobucket.com/albums/y113/luckeyzero/DSCN1555.jpg" border="0"
alt="Photobucket"></a>
<a href="http://s4.photobucket.com/albums/y113/luckeyzero/?
action=view¤t=DSCN1556.jpg" target="_blank"><img src="http://
i4.photobucket.com/albums/y113/luckeyzero/DSCN1556.jpg" border="0"
alt="Photobucket"></a>
<a href="http://s4.photobucket.com/albums/y113/luckeyzero/?
action=view¤t=DSCN1557.jpg" target="_blank"><img src="http://
i4.photobucket.com/albums/y113/luckeyzero/DSCN1557.jpg" border="0"
alt="Photobucket"></a>
Posted by paul c on March 17, 2010, 12:51 pm
Matt Johnson wrote:
>...
>> p.s. i feel silly for thinking the drain screws were like an on/off
>> switch. i've been looking at carburetor assembly diagrams for days now
>> and they are clearly screws... sigh, chalk it up to inexperience! haha
>
> http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1555.jpg
> http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1557.jpg
> http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1556.jpg
> ...
Nice snaps, from the appearance of the screws (no gouging that I can
see), it looks like somebody was careful.
On the #2 carb, I see a hose is missing from what looks to be an
accelerator pump.
Posted by TOG@Toil on March 17, 2010, 1:02 pm
> Matt Johnson wrote:
> >...
> >> p.s. i feel silly for thinking the drain screws were like an on/off
> >> switch. i've been looking at carburetor assembly diagrams for days now
> >> and they are clearly screws... sigh, chalk it up to inexperience! haha
> >http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1555.jpg
> >http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1557.jpg
> >http://i4.photobucket.com/albums/y113/luckeyzero/DSCN1556.jpg
> > ...
> Nice snaps, from the appearance of the screws (no gouging that I can
> see), it looks like somebody was careful.
> On the #2 carb, I see a hose is missing from what looks to be an
> accelerator pump.
Did the 900C have accelerator pump carbs? Paging Mr Olson.
Posted by paul c on March 17, 2010, 1:10 pm
TOG@Toil wrote:
...
>> On the #2 carb, I see a hose is missing from what looks to be an
>> accelerator pump.
>
> Did the 900C have accelerator pump carbs? Paging Mr Olson.
Sorry, I may have used the wrong name, meant the gizmo (is is
deceleration pump) that reduces backfiring when the throttle is closed
at speed.
XML Sitemap
> > the drain screws all the way around the opposite direction, but that
> > didnt change anything. ill take the carb off and try to post some pics
> > tonight.
> I think the simplest solution is probably the most accurate. You haven't
> tightened up the drain screws properly.
> Krusty's right when he says O-rings deteriorate with age, but for all
> four to go at the same time? Nah.
> --
> BMW K1100LT Ducati 750SS Honda CB400F Triumph Street Triple
> Suzuki TS250ER GN250 Damn, back to six bikes!
> Try Googling before asking a damn silly question.
> chateau dot murray at idnet dot com