Re: Any Vintage two stroke guru's out there?

Motorcycle Mechanics - Motorcycle Technical Discussion. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Any Vintage two stroke guru's out there? Rob Kleinschmidt 12-31-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by =?ISO-8859-1?B?x1186ejpfXt7?= on January 1, 2008, 8:37 pm

> Umm, 48 years ago a Villiers 250 sent me to hospital with an
> unbolted kick starter in my heel. Some events tell you to wear
> boots and remount the rubber on the starter when it fell off.

The absolute worst kick starter I ever saw was on a Greeves MX5 250cc.

You had to put your foot on the pedal at exactly a 45 degree angle.

If your foot slipped off the pedal, the level bruised the inside of
your calf.

If your foot stayed on the pedal all the way through the kick, you
could break your tows hitting the foot peg.

The next model was the Greeves Griffon, which was a lot like a
Husqvarna.

You folded the foot peg up out of the way and hooked a wire ring
around it to keep it out of the way when you kicked.

If you were in a race with a dead engine start, you then had to reach
down and unhook the foot peg and find first gear.

By the time you did that, all the Yamahas and Suzukis were gone...




Similar ThreadsPosted
Re: Any Vintage two stroke guru's out there? December 30, 2007, 7:47 pm
Re: Any Vintage two stroke guru's out there? January 6, 2008, 12:51 am
Re: Any Vintage two stroke guru's out there? January 1, 2008, 3:01 am
Re: Any Vintage two stroke guru's out there? January 1, 2008, 11:23 am
Any Vintage two stroke guru's out there? December 30, 2007, 3:52 pm
Do 2-stroke engines have oil filter? December 13, 2007, 1:09 pm
beat up two stroke honda -- is it worth it? June 10, 2007, 8:12 pm
No smoke using T2 synthetic (two stroke) anymore September 7, 2007, 4:09 pm
Vintage piston? December 13, 2007, 9:23 pm
Re: Vintage piston? December 21, 2007, 8:43 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap