Re: Bike won't start after carb cleaning.

Motorcycle Mechanics - Motorcycle Technical Discussion. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Bike won't start after carb cleaning. Rob Kleinschmidt 04-09-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Rob Kleinschmidt on April 9, 2008, 2:17 pm

> After waiting till the engine cooled, I attempted to start it again.
> No go. It turns fine and sounds good, it just won't fire. I'm trying
> to start it with a boost from my car (car running) and no go. I have
> the choke full on and everywhere in between. I have the air screws set
> from one turn to 2.5 turns out and this too didn't help. Spark is nice
> and strong on both cylinders. I know the carb is getting fuel as I see
> it in the float bows (after draining it). All systems seem fine but
> the thing just refuses to start. The puzzler is, when it does start it
> seems to run great (albeit with the choke still on and some backfire
> due to this) till it gets hot and dies again. Except that now I can't
> get it to start at all, even with a boost from the car and several
> minutes of trying.
>
> Is there a trick to getting this bike to start nicely again?

If it runs OK cold but dies when hot, sounds like it's rich,
though I can't tell from your description whether the choke
is still on or not.

If I had to make a bet, I'd wonder if you got the choke
back together right. When if gets hot and dies, what
color are the plugs ?

As a suggestion, it's really good to separate your
description of the symptoms from your description
of what you did to the bike.

Both descriptions are useful, but it'd hard to sort out
when you keep mixing the two of them together in the
same paragraphs. Separate lists of symptoms and
what you did would probably help you to get a better
handle on the problem as well.

Similar ThreadsPosted
Re: Bike won't start after carb cleaning. April 8, 2008, 12:19 pm
Re: Bike won't start after carb cleaning. April 9, 2008, 12:22 pm
Helmet Cleaning September 10, 2007, 7:34 am
Help with cleaning the inside of a H4 headlamp April 10, 2007, 3:51 pm
Help with cleaning small miltipin connectors. April 2, 2007, 2:25 pm
Cleaning fork seals instead of replacing them March 24, 2007, 11:50 am
81 Virago 750 won't start August 29, 2007, 10:27 am
GT380 engine won't start July 5, 2007, 6:06 am
1982 Yamaha 650 - no start July 9, 2008, 8:22 pm
GPZ600R ('86 I believe) Won't Start, Tried Everything, Any ideas please? July 28, 2008, 12:42 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap