Yamaha tw 125 trailway carb question

register ::  Login Password  :: Lost Password?
Posted by CJ on April 21, 2007, 2:50 pm
 
please rate
this thread
IToday I broke the sensor on the carb (with two wires feeding it,on
yellow and one black. Yellow wire is on top),the sensor is on the
right hand side of the carb. Since I broke it, when the bike is
revved, the revs seem to take a while to come down to tickover (the
revs hang at 3/4 to 2 time the usual idle speed for a few seconds,
then they die down to tickover)
The bike's year is 2000 (W reg)
Does anyone know what this sensor does?

Thanks in advance.


Posted by Albrecht on April 21, 2007, 8:06 pm
 

That model isn't sold in the USA. You might try googling for online
mail order catalogs in the UK that have parts fiches which customers
can look at and perhaps figure out what the sensor does by its
description. Your engine seems to have a Teikei YP24 carburetor,
according to the only English website that I found with specifications
for the TW125.

Maybe your sensor has to do with shutting off fuel to the idle
circuit. Your high RPM at idle indicates that the throttle butterfly
is too far open for idling at the specified speed. The transition
ports are uncovered by the edge of the throttle butterfly, so the
engine is getting excess fuel at idle and it takes several seconds to
idle down.

An engine is supposed to idle smoothly with the smallest amount of
throttle opening and with the idle mixture screws turned out the
fewest number of turns possible.

I have read about carbs with throttle position sensors that will shut
off the fuel supply if the position of the throttle twist grip
disagrees with the position of the throttle butterfly or slide.

This is supposed to protect newbies from having a motorcycle run away
with them clinging on for dear life.

Other electrical devices on carburetors operate a little valve in the
side of the carburetor that shuts off an air passage. This is
necessary when coasting on closed throttle to keep the engine from
backfiring.

But that is usually done with a vacuum sensing rubber diaphragm on the
left side of the carb.









Posted by The Older Gentleman on April 22, 2007, 9:46 am
 

Ask a Yamaha dealer?


--
BMW K1100LT  750SS  CB400F  CD250  SL125
GAGARPHOF#30 GHPOTHUF#1 BOTAFOT#60 ANORAK#06 YTC#3
BOF#30 WUSS#5  The bells, the bells.....

This Thread
Bookmark this thread:
 
 
 
 
 
 
  •  
  • Subject
  • Author
  • Date

Contact Us | Privacy Policy

XML SitemapXML Sitemap