idle jet on 750quad-what rpm range is affected?
Groups | Search | About
Login Password
Register Now! Lost Password?

Motorcycle Mechanics - Motorcycle Technical Discussion. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
idle jet on 750quad-what rpm range is affected? cliffsarrel 07-08-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on July 8, 2008, 12:02 am
i want to know from what rpm- what rpm the idle jets have an effect on
performance.when you take off from a dead stop and it bogs a
little,could that be idle jet related?
after 3000 rpm the bike runs great,however,after a 15 min.ide,i pull
the plugs and they are sooty-not wet.only the #1 cyl is not sooty
adjusting the air screws does not seem to make much difference.boots
are good
ran the bike shortly without connecting boots to air filter to see if
that made a diff.
my next thought is to adjust the valves
whhatta ya think? 81 xj750 seca

Posted by Who Me? on July 8, 2008, 9:13 am


> my next thought is to adjust the valves
> whhatta ya think? 81 xj750 seca

Is this the same bike with gas in the oil??

I think you need to do rings, valves and bearings (complete engine rebuild).
Then after that, you can rebuild the carbs. .........which is, no doubt, the
real source of ALL your problems.

OR......for somebody asking a lot of clueless questions, find a qualified
mechanic and pay him to fix the carbs. You will be ahead in the long
run.......probably in time and money too.




Similar ThreadsPosted
93 gsx750f idle January 31, 2007, 9:07 am
just an idle question June 15, 2008, 7:42 pm
Throttle pickup from idle August 8, 2007, 11:50 am
81 Maxim xj550 Idle problems April 29, 2007, 10:01 pm
1972 cb350 idle issues June 14, 2007, 5:21 pm
Suzuki DR250 stalls off idle October 23, 2007, 9:02 am
Re: High idle on an 87 Fazer (FZ700) April 30, 2006, 7:44 pm
Re: High idle on an 87 Fazer (FZ700) May 2, 2006, 4:58 am
Clearing out an idle circuit the lazy way March 27, 2008, 12:47 pm
Setting idle mixture screw on old Hondas June 18, 2007, 3:18 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap