1990 cr 250 water pump leak NEED HELP FAST

 ok its a 1990 cr250 i have a water pump leak on the littel hole on the
bottom of the caseing looks like a drain hole only drips out a littel
when i rev the motor any one help me with this on the bike is being
sold and hes picking it up this week end

 On 23 Jan 2007 15:32:55 -0800, xmugsyx@si.rr.com blathered:


You need a couple things, some can be bought at the local Honda
dealer. The capitol letters and punctuation are free, in stock and
right on your keyboard. The water pump seal, bearing, impeller shaft
and gaskets can be bought at the bike shop.

MX Tuner
'03 Honda CRF480R
'06 Suzuki Hayabusa 1300
'06 Nissan Titan LE

 Its not over heating i replaced the impeller not to long ago . Dose the
impeller lay on a seal that covers the week hole .


bought at the local Honda

 I will make this a little more simple for you.

Go to a Honda motorcycle dealership.  Go to the parts department.
Place an order for the following items, all for a 1990 CR250

1.  Water pump seal
2.  Impeller shaft
3.  Impeller shaft bearing
4. Water pump gasket

When the parts arrive, install them.  


The reason for these parts are to repair a faulty seal and replace
what is surely a 17 year old impeller shaft and bearing which probably
caused the seal failure.  

Good Luck!

Mike Baxter


On 23 Jan 2007 18:23:50 -0800, xmugsyx@si.rr.com wrote:


be bought at the local Honda

 On Tue, 23 Jan 2007 19:50:10 -0800, Mike Baxter


AND - make sure you install the seals facing the right way (if
they're like the CRF450 seals).

Tuner: what do you think of the Boyesen impeller and cover?


----
Go fast and aim for where the trees aren't.
----