250r Honda rear wheel switch questions

register ::  Login Password  :: Lost Password?
Posted by oldfart on August 25, 2011, 5:29 pm
 
please rate
this thread
I have acquired a mighty cr250r for my collection but since I prefer
riding single  track desert, Oregon singles with gnarly tree roots and
such I thought it prudent to switch my 19 inch wheel for an 18, common
to woods riders. I have never done this before and would appreciate
any guidance you experienced folks might give to me. Where do I start?
Thanks,
OF

Posted by Scrape on August 25, 2011, 7:21 pm
 b4c8f54f7061@u6g2000prc.googlegroups.com:


What year is the bike?

Posted by Tiago on August 26, 2011, 6:58 am
 

If I'm not mistaken, CR125/250/XR250R/400 share the same hub. The rim
on the XR250 is narrower than on 400 and just the spokes on the CR are
longer.

I did this research a couple years ago when I switched the drum brake
on my brazilian built XR250 with a japanese built XR250 with disk
brake. I was looking for a 400 wheel, but found a great bargain on the
250 complete wheel. Now my bike has a narrower rear rim than the
front.

-- Tiago


Posted by oldfart on August 27, 2011, 7:33 am
 
It is a 2003.

Posted by Scrape on August 28, 2011, 2:48 am
 

I'll check part numbers and whatnot in the morning. Did you want a complete
wheel or were you thinking about lacing a different rim to your existing
hub?

This Thread
Bookmark this thread:
 
 
 
 
 
 
  •  
  • Subject
  • Author
  • Date

Contact Us | Privacy Policy

XML SitemapXML Sitemap