Fork Oil Amount

 

I have an 84 DT 200 I picked up cheep and yeah its fork seal time
(looks like it has been for a few years) .
 Can anyone tell me how much oil goes into each Leg or point me in the
direction for the info?

 Thanx muchly










Now hold still, this is gonna hurt.
Husky WR240
Husky WR430
DT 200L

 

pokeit1st@gmail.com writes

Don't have any data on these but I usually, without the spring in the
fork and the fork fully compressed, set the oil level a minimum of 110mm
below the top of the fork tube.  This is usually about right for road
bikes but a greater travel from a mud plugger may require something a
little more.  I'd go with whatever the book says for the huskies, it
won't be a million miles off!
--
The Bantam

XJR1200SP, FZR1000ExUp(1), FZR1000ExUp(2), XS750SF
and loads before those . . . . .

 

Have the info for the huskies, and they are normal style forks, the
yammy is way different. no end caps so needs to be filled via the leg
after assembly so need the exact amount.
 would have thought i could find more info on the DT than just 10weight
KYB