Posted by eek on August 13, 2007, 7:00 pm
threw a couple of old 500 watt speaker mags in my bags, work great for me
and I recycled materials
> Hi there. Check out these magnetic gadgets that mount to the bottom of
> your
> bike and trip the sensors at traffic lights. I figure if they only trip
> half
> of them, that's still a good deal for less than twenty bucks.
> www.motorcyclemagnets.com
Posted by Timberwoof on August 13, 2007, 8:17 pm
> > Hi there. Check out these magnetic gadgets that mount to the bottom of
> > your
> > bike and trip the sensors at traffic lights. I figure if they only trip
> > half
> > of them, that's still a good deal for less than twenty bucks.
> >
> > www.motorcyclemagnets.com
> threw a couple of old 500 watt speaker mags in my bags, work great for me
> and I recycled materials
500 watt speaker magnets. Hmm. I didn't know that magnet strength was
measured in watts. Oh! You meant magnets from 500w speakers? Oh, now I
know what you mean! Hey, when you got new tires for your motorcycle,
were you sure to specify 100 hp tires? :p ;-) }: )
--
Timberwoof <me at timberwoof dot com>
faq: http://www.timberwoof.com/motorcycle/faq.shtml
It's easy to say a war is so important your neighbor should go fight it for you.
Posted by Porgy Tirebiter on August 14, 2007, 1:25 am
>> > Hi there. Check out these magnetic gadgets that mount to the bottom of
>> > your
>> > bike and trip the sensors at traffic lights. I figure if they only trip
>> > half
>> > of them, that's still a good deal for less than twenty bucks.
This is all pretty funny really.
If the intersection was using a OLD magnatometer the magnet WOULD work.....
Most intersections use a RF coil that is sitting close to 150Khz. It's
detuned by steel or a large amount of aluminum.
In plain and simple english.....MAGNETS DO NOT WORK!!
Safetran loop detectors do not care about a MAGNETIC field.But your going to
believe what you want. :)
I mean..what the fuck do *I* know, even after working on traffic signal
controllers (Type 170) for many years....
.
Posted by Bike Guy Joe on August 14, 2007, 7:01 am
> This is all pretty funny really.
> If the intersection was using a OLD magnatometer the magnet WOULD work.....
> Most intersections use a RF coil that is sitting close to 150Khz. It's
> detuned by steel or a large amount of aluminum.
> In plain and simple english.....MAGNETS DO NOT WORK!!
> Safetran loop detectors do not care about a MAGNETIC field.But your going to
> believe what you want. :)
> I mean..what the fuck do *I* know, even after working on traffic signal
> controllers (Type 170) for many years....
> .
Well......What will work?
Posted by tater on August 14, 2007, 9:34 am
> Well......What will work?
I was wondering the same thing. But it must be some kind of secret since
he wouldn't tell us.
XML Sitemap
> your
> bike and trip the sensors at traffic lights. I figure if they only trip
> half
> of them, that's still a good deal for less than twenty bucks.
> www.motorcyclemagnets.com