Posted by petroccij on April 3, 2006, 11:15 pm
I have a 650 vstar classic
I just put a new winshield from yamaha on the bike
i seems to vibrate and bounce around quite a bit.
I have cobra pipes on so i does move some from that
and from the wind.. but should it move a lot??
any help would be great. thanks
Jeremiah
Posted by e on April 4, 2006, 1:20 pm
>I have a 650 vstar classic
>I just put a new winshield from yamaha on the bike
>i seems to vibrate and bounce around quite a bit.
>I have cobra pipes on so i does move some from that
>and from the wind.. but should it move a lot??
>any help would be great. thanks
>Jeremiah
that last sentance was kind of garbled. please ask again?
winDshields do add vibration.
Posted by petroccij via MotorcycleKB.com on April 5, 2006, 4:52 pm
it makes a little noise and moves quite a bit.
Is there any way to reduce some of that vibration
it is complety fine while just sitting but at high speeds and bumps
it tends to move a lot.
thanks
e wrote:
>>I have a 650 vstar classic
>>I just put a new winshield from yamaha on the bike
>[quoted text clipped - 3 lines]
>>any help would be great. thanks
>>Jeremiah
>that last sentance was kind of garbled. please ask again?
>winDshields do add vibration.
--
Message posted via http://www.motorcyclekb.com
Posted by e on April 5, 2006, 5:34 pm
wrote:
>it makes a little noise and moves quite a bit.
>Is there any way to reduce some of that vibration
>it is complety fine while just sitting but at high speeds and bumps
>it tends to move a lot.
>thanks
see if you can contact the maker of your shield.
perhaps if you explain the problem to them, they can help.
there are many factors.
that could affect your problem. often a change
of incidence, (the degree of lean) can change things.
but the maker should be your best source.
who are they?
Posted by petroccij via MotorcycleKB.com on April 9, 2006, 9:59 pm
Okay i'll check with the dealer
they are out of the Kansas City area
Thanks
Jeremiah
e wrote:
>>it makes a little noise and moves quite a bit.
>>Is there any way to reduce some of that vibration
>>it is complety fine while just sitting but at high speeds and bumps
>>it tends to move a lot.
>>thanks
>see if you can contact the maker of your shield.
>perhaps if you explain the problem to them, they can help.
>there are many factors.
> that could affect your problem. often a change
>of incidence, (the degree of lean) can change things.
>but the maker should be your best source.
>who are they?
--
Message posted via MotorcycleKB.com
http://www.motorcyclekb.com/Uwe/Forums.aspx/yamaha/200604/1
XML Sitemap
>I just put a new winshield from yamaha on the bike
>i seems to vibrate and bounce around quite a bit.
>I have cobra pipes on so i does move some from that
>and from the wind.. but should it move a lot??
>any help would be great. thanks
>Jeremiah