yes the solenoid is making a clicking noise when u try and start the
motorcycle now what, does that mean the battery is good what would be
the next step i need to take to fix the motorcycle and thanks for the
help so far
bobby b the silveradoman wrote:
>yes the solenoid is making a clicking noise when u try and start the
>motorcycle now what, does that mean the battery is good what would be
>the next step i need to take to fix the motorcycle and thanks for the
>help so far
Got a volt meter and a trickle charger?
Charge the battery at 0.6 amps with a trickle charger for about 12 hours.
Check the voltage across the battery terminals with a digital voltmeter.
The voltage should rise to about 15.0 volts.
Disconnect the battery from the charger and let it sit for about 30 minutes
to an hour.
Check the voltage again. If it is 12.8 volts, the battery is fully charged.
If it is down around 12.0 volts the battery is too old, you need to replace
it.
--
Message posted via MotorcycleKB.com
http://www.motorcyclekb.com/Uwe/Forums.aspx/yamaha/200705/1
XML Sitemap
>motorcycle now what, does that mean the battery is good what would be
>the next step i need to take to fix the motorcycle and thanks for the
>help so far